Digital signal processing (DSP) is the mathematical manipulation of an information signal to modify or improve it in some way. It is characterized by the representation of discrete time, discrete frequency, or other discrete domain signals by a sequence of numbers or symbols and the processing of these signals.

The goal of DSP is usually to measure, filter and/or compress continuous real-world analog signals. Usually, the first step is conversion of the signal from an analog to a digital form, by sampling and then digitizing it using an analog-to-digital converter (ADC), which turns the analog signal into a stream of discrete digital values. Often, however, the required output signal is also analog, which requires a digital-to-analog converter (DAC). Even if this process is more complex than analog processing and has a discrete value range, the application of computational power to signal processing allows for many advantages over analog processing in many applications, such as error detection and correction in transmission as well as data compression.

Digital signal processing and analog signal processing are subfields of signal processing. DSP applications include audio and speech signal processing, sonar and radar signal processing, sensor array processing, spectral estimation, statistical signal processing, digital image processing, signal processing for communications, control of systems, biomedical signal processing, seismic data processing, among others. DSP algorithms have long been run on standard computers, as well as on specialized processors calleddigital signal processors, and on purpose-built hardware such as application-specific integrated circuit (ASICs). Currently, there are additional technologies used for digital signal processing including more powerful general purpose microprocessors, field-programmable gate arrays (FPGAs), digital signal controllers (mostly for industrial applications such as motor control), and stream processors, among others.

Digital signal processing can involve linear or nonlinear operations. Nonlinear signal processing is closely related to nonlinear system identification and can be implemented in the time, frequency, and spatio-temporal domains.

Signal sampling

The increasing use of computers has resulted in the increased use of, and need for, digital signal processing. To digitally analyze and manipulate an analog signal, it must be digitized with an analog-to-digital converter. Sampling is usually carried out in two stages, discretization and quantization. In the discretization stage, the space of signals is partitioned into equivalence classes and quantization is carried out by replacing the signal with representative signal of the corresponding equivalence class. In the quantization stage, the representative signal values are approximated by values from a finite set.

The Nyquistâ€“Shannon sampling theorem states that a signal can be exactly reconstructed from its samples if the sampling frequency is greater than twice the highest frequency of the signal, but this requires an infinite number of samples. In practice, the sampling frequency is often significantly higher than twice that required by the signal's limited bandwidth.

Some (continuous-time) periodic signals become non-periodic after sampling, and some non-periodic signals become periodic after sampling. In general, for a periodic signal with period T to be periodic (with period N) after sampling with sampling interval Ts, the following must be satisfied:

where k is an integer.

DSP domains

In DSP, engineers usually study digital signals in one of the following domains: time domain (one-dimensional signals), spatial domain (multidimensional signals), frequency domain, and wavelet domains. They choose the domain in which to process a signal by making an informed assumption (or by trying different possibilities) as to which domain best represents the essential characteristics of the signal. A sequence of samples from a measuring device produces a temporal or spatial domain representation, whereas adiscrete Fourier transform produces the frequency domain information, that is, the frequency spectrum. Autocorrelation is defined as the cross-correlation of the signal with itself over varying intervals of time or space.

Time and space domains

The most common processing approach in the time or space domain is enhancement of the input signal through a method called filtering. Digital filtering generally consists of some linear transformation of a number of surrounding samples around the current sample of the input or output signal. There are various ways to characterize filters; for example:

- A "linear" filter is a linear transformation of input samples; other filters are "non-linear". Linear filters satisfy the superposition condition, i.e. if an input is a weighted linear combination of different signals, the output is a similarly weighted linear combination of the corresponding output signals.
- A "causal" filter uses only previous samples of the input or output signals; while a "non-causal" filter uses future input samples. A non-causal filter can usually be changed into a causal filter by adding a delay to it.
- A "time-invariant" filter has constant properties over time; other filters such as adaptive filters change in time.
- A "stable" filter produces an output that converges to a constant value with time, or remains bounded within a finite interval. An "unstable" filter can produce an output that grows without bounds, with bounded or even zero input.
- A "finite impulse response" (FIR) filter uses only the input signals, while an "infinite impulse response" filter (IIR) uses both the input signal and previous samples of the output signal. FIR filters are always stable, while IIR filters may be unstable.

A filter can be represented by a block diagram, which can then be used to derive a sample processing algorithm to implement the filter with hardware instructions. A filter may also be described as a difference equation, a collection of zeroes and poles or, if it is an FIR filter, an impulse response or step response.

The output of a linear digital filter to any given input may be calculated by convolving the input signal with the impulse response.

Frequency domain

Signals are converted from time or space domain to the frequency domain usually through the Fourier transform. The Fourier transform converts the signal information to a magnitude and phase component of each frequency. Often the Fourier transform is converted to the power spectrum, which is the magnitude of each frequency component squared.

The most common purpose for analysis of signals in the frequency domain is analysis of signal properties. The engineer can study the spectrum to determine which frequencies are present in the input signal and which are missing.

In addition to frequency information, phase information is often needed. This can be obtained from the Fourier transform. With some applications, how the phase varies with frequency can be a significant consideration.

Filtering, particularly in non-realtime work can also be achieved by converting to the frequency domain, applying the filter and then converting back to the time domain. This is a fast, O(n log n) operation, and can give essentially any filter shape including excellent approximations to brickwall filters.

There are some commonly used frequency domain transformations. For example, the cepstrum converts a signal to the frequency domain through Fourier transform, takes the logarithm, then applies another Fourier transform. This emphasizes the harmonic structure of the original spectrum.

Frequency domain analysis is also called spectrum- or spectral analysis.

Z-plane analysis

Whereas analog filters are usually analyzed in terms of transfer functions in the s plane using Laplace transforms, digital filters are analyzed in the z plane in terms of Z-transforms. A digital filter may be described in the z plane by its characteristic collection of zeroes and poles. The z plane provides a means for mapping digital frequency (samples/second) to real and imaginary z components, where for continuous periodic signals and ( is the digital frequency). This is useful for providing a visualization of the frequency response of a digital system or signal.

Wavelet

In numerical analysis and functional analysis, a discrete wavelet transform (DWT) is any wavelet transform for which the wavelets are discretely sampled. As with other wavelet transforms, a key advantage it has over Fourier transforms is temporal resolution: it captures both frequency and location information (location in time).

Applications

The main applications of DSP are audio signal processing, audio compression, digital image processing, video compression,speech processing, speech recognition, digital communications, radar, sonar, financial signal processing, seismology andbiomedicine. Specific examples are speech compression and transmission in digital mobile phones, room correction of sound in hi-fi and sound reinforcement applications, weather forecasting, economic forecasting, seismic data processing, analysis and control of industrial processes, medical imaging such as CAT scans and MRI, MP3 compression, computer graphics,image manipulation, hi-fi loudspeaker crossovers and equalization, and audio effects for use with electric guitar amplifiers.

Developments Tourism boards CVB & DMO Travel Agencies Tour operators & OTA Travel Management companies Android destination App Advanced technologies Innovation quality Tourism Board Travelers Animations and effcts Publishers custom branded app affiliate offline application IOS Self Guided City Walks Each City iTunes GPS

App Developments Device Mobile Development Consultancy Solutions Innovation PKI Certification GPS Geolocation APK Push modifications APP Security ICT Marketing Admob @ Advertising Message Enterprise back office processes cartography geo-data IOS Android app store efficiently Smartphone Tablet Native-app Instant-app Web-app IPhone IPad Android Kindle IOS Revmob Dollfish Admob Airpusch SDK Mobile ADS SMTP Google Analytics FTP Hybrid-app XML Java Apple store Amazon Hybrid Google Play Statistics Facebook Social Media Integration shopping Mobile Development cart video In-App-Purchase HTML App-Style Microsoft SYNC APPID ITunes Windows-store Virtual reality Podcasts Monetize QR Codes Conversation Software Application.